Flat Tire Changing tips for your Car 

Flat tires are a damper on your journeys and leave you frustrated on the road as you try to find help. Knowing how to change a flat tire can often be a life-saving skill in such a situation. Pick up these straightforward flat tire changing tips for your car with us at Sheehy Auto Stores in Washington, DC. Continue reading for more information.  

Steps to Change a Flat Tire 

Before changing a flat tire, you will need to have access to a spare tire, a jack, and a wrench. You might also require a WD-40 solvent to loosen the nuts in case they are screwed on tight. Armed with these tools, you can begin changing the flat tire after engaging the parking brake and switching on the hazard light of your car.  

[Read More: Where to get an oil change in Washington, DC?] 

To change the flat tire, you will have to follow the following steps:  

Step 1: Use the jack to raise the wheel. 

Step 2: Remove the wheel cover and loosen the nuts.  

Step 3: Replace the flat tire with the spare tire.  

Step 4: Place the nuts back and tighten them.  

Step 5: Fix the wheel cover.  

Step 6: Lower the jack until the tire hits the ground.  

[Read More: Where to get a great deal on your trade-in near Washington, DC?] 

Now that your flat tire has been changed remember to return all your tools to the space under the luggage compartment. You can turn off your hazard lights and slowly make your way into the traffic. Drive into the nearest service station and get your tire pressure checked so that you can continue the rest of your journey worry-free.  

If you are in the Washington, DC region, drop in at Sheehy Auto Stores and check out our tire replacement options. You can also schedule a service at our various service locations and keep your car well maintained with our expert care. Reach out to the dealership for further assistance.